| Startech.com 1 Port Gigabit PoE+ Injector 48v/30w |
 Startech.com 1 Port Gigabit PoE+ Injector 48v/30w Supply power and data connectivity to an individual Gigabit PoE device over standard Ethernet cabling - Power over Ethernet Injector - 802.3at / 802.3af - Wall-Mountable 1000Mbps High-Power PoE Injector Adapter - PoE / PSE Power over Ethernet Adapter Device Type:Media Converter Form Factor:External Data Transfer Rate:1000 MBps Interfaces:RJ-45 Max Transfer Distance:TBD Width:1.80 Inch Depth:2.80 Inch Height:1.00 Inch Service & Support Type:2 Years warranty RoHS:Y COO:Taiwan 1-Port Gigabit Midspan - PoE+ Injector - 802.3at and 802.3af The POEINJ1G 1 Port Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device over standard Ethernet cabling at distances of up to 100m (330ft).This single-port PoE injector allows you to easily connect an individual PoE-powered device (PD) to a non-PoE LAN switch, avoiding the cost of upgrading your switch to a PoE-enabled model. Fully compliant with IEEE 802.3at / 802.3af standards, the high-power PoE / PSE adapter provides a 10/100/1000Mbps port with support for up to 48V (30W max) output.A perfect solution for applications where an electrical outlet may not be available, the injector adapter can be used to power PoE-enabled devices such as IP cameras or Wireless Access Points (WAPs). The compact, wall-mountable design makes it easy to install the adapter into areas where space is limited, and can be installed in seconds with no configuration required.Backed by a StarTech.com 2-year warranty and free lifetime technical support. Manufacturer StarTech.com Manufacturer Part Number POEINJ1G Manufacturer Website Address http://www.startech.com Brand Name StarTech.com Product Name 1-Port Gigabit Midspan - PoE+ Injector - 802.3at and 802.3af Marketing Information Deliver power and data to your Power over Ethernet device using this mountable PoE+ midspan. This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable, at distances of up to 100 m (330 ft.). The PoE midspan is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model. Convenience and cost savings This versatile PoE injector lets you connect a PoE-powered device (PD) to a non-PoE network switch, so you can avoid the expense and aggravation of replacing your existing switch with a PoE-enabled model. It supplies up to 30 watts of power, so you can easily power and access a high-power PoE-compliant device, such as an IP camera or a wireless access point (WAP), using traditional copper (RJ45) Ethernet cable. The midspan injector makes it easy to extend data and power connectivity to your PoE+ device across long distances, even in a remote location where a typical power outlet isn't available. Easy to set up in mixed environments You can integrate this compact injector discreetly into a variety of environments. It features a surface-mountable housing that's perfect for installing on walls or under a desk, but it's also palm-sized, for use on desktop surfaces. Plus, with plug-and-play operation, you can enjoy fast and hassle-free setup without disrupting your workflow. Intelligent power allocation Not sure which class your PoE device is? The Gigabit PoE+ injector automatically detects the power requirements of your connected PoE PD, and delivers the appropriate level of power without damaging your device. The POEINJ1G is backed by a StarTech.com 2-year warranty and free lifetime technical support. Packaged Quantity 1 Product Type PoE Injector Input Voltage 120 V AC Input Voltage 230 V AC Maximum Output Voltage 48 V Maximum Input Current 750 mA Maximum Output Current 750 mA Maximum Frequency 60 Hz Maximum Output Power 30 W Input Ports 1 10/100/1000Base-T Output Ports 1 10/100/1000Base-T Color Black Mount Type Wall Mountable Height 1" Width 2.5" Length 2.8" Weight (Approximate) 1. Price: 83.99 |